GO TO GLOBAL SITE

INOXPA USA, INC

Santa Rosa

CA 95407, USA

Tel. +1 707 585 3900

inoxpa.us@inoxpa.com

Name and surname
Company
E-mail
Country
Town
Comments
I have read and accept the privacy policy
I agree to receive promotional information

News

Home / INOXPA Group / News / INOXPA CIP system: greater control and a more efficient cleaning process

13/05/2020

INOXPA CIP system: greater control and a more efficient cleaning process

INOXPA offers a wide range of CIP equipment suitable for cleaning processes for all types of installations in the food, cosmetic, and pharmaceutical industries, where strict cleaning results are required to ensure product quality.

INOXPA has a range of mobile CIP units, meaning that they can be moved close to equipment and installations requiring cleaning. Electrical resistances are normally used for heating and tanks with volumes up to 500 litres can be used. The equipment can be manually operated or automatic.

A range of static CIP untis are also available, with all components (pumps, valves, heat exchangers, and instrumentation) mounted on a base frame. It also includes the control board. The tanks are placed directly onto the floor, which means that INOXPA can supply the CIP base frame and customers can buy tanks from local manufacturers.

INOXPA CIP systems can use 1 tank or up to 5-6 tanks. The equipment can have specific tanks for acidic products, alkaline products, water, recovered water, purified water, and disinfectant.

The equipment can be designed to clean just one line or several lines simultaneously. A CIP unit will have as many lines as production lines to be cleaned simultaneously. Sizing the tanks for a chemical product or water is very important so that different lines are fed simultaneously during operation.

The production quality department needs to work alongside a chemical product manufacturer in order to choose the right cleaning products for their production plant to ensure that it is cleaned correctly.

Once chosen, INOXPA will either select or design the CIP equipment that can operate with those cleaning products, varying the time, temperature, and concentration in accordance with the technical specifications of the chemical products. It is also important to guarantee the flow rate to ensure a suitable mechanical cleaning effect.

Our customers are increasingly requesting reports on each cleaning process to ensure that the process was carried out correctly. This makes it essential for CIP units to be fully automatic, using scheduled programs for cleaning different installations or products. Automatically operated CIP systems can significantly reduce cleaning process time, prevent errors, and avoid exposing operators to unnecessary risks.

INOXPA supplies CIP units for the food, cosmetic, and pharmaceutical industres, where there are specific demands in terms of operations and level of automation, to avoid cross-contamination, to guarantee that the process is carried out correctly, and to record the operator in charge of the cleaning program activation.

Other news

13/07/2020

Worldwide demand for hand sanitiser has grown significantly since the outbreak of COVID-19. INOXPA offers a range of skids to manufacture hand sanitisers

31/03/2020

COVID-19

Given the current situation in Spain amid the coronavirus outbreak, we would like to inform you that INOXPA is considered a provider of essential services

10/12/2019

INOXPA Headquarters hosted a training and demo session of the CIP cleaning and product recovery systems held at the pilot plant

21/11/2019

The INOXPA PIGGING SYSTEM recovers products that remain in the pipework after each production run, enabling the recovery of up to 98% of leftover product

18/07/2019

3-A certificate has been awarded to INNOVA N and INNOVA K seat valves, designed for use in the main processes in the food, dairy, beverage, and pharmaceutical industries

18/12/2018

INOXPA, a consolidated brand in constant evolution

INOXPA’s marketing and communication department works toward the objective of maintaining a coherent image representative of a company in continuous growth

inoxpa-announces-the-acquisition-of-fluinox

14/12/2018

INOXPA genuine spare parts are subject to strict quality control, that guarantees the correct performance of all INOXPA products

08/06/2018

INOXPA CIP system: greater control and a more efficient cleaning process

Other news

Re-manufacturing of components

Remanufacturing of components comes with significant benefits, as it helps to extend equipment’s useful life

How to manufacture hand sanitisers

Worldwide demand for hand sanitiser has grown significantly since the outbreak of COVID-19. INOXPA offers a range of skids to manufacture hand sanitisers

COVID-19

Given the current situation in Spain amid the coronavirus outbreak, we would like to inform you that INOXPA is considered a provider of essential services

LR/LM side entry agitator

LR/LM side entry agitator range is designed for use in low viscosity product mixing and maintenance applications

Pilot plant session: CIP systems

INOXPA Headquarters hosted a training and demo session of the CIP cleaning and product recovery systems held at the pilot plant

Visit to the factory

Students from the University of Girona visited INOXPA Headquarters in Banyoles

Case studies

To share our experiences, we added a special section of Case studies to the website

Новый видеоклип: производство комплексных решений в INOXPA

A new video clip has been released: production of Solutions at INOXPA

PIGGING SYSTEM - Highest hygiene and efficiency

The INOXPA PIGGING SYSTEM recovers products that remain in the pipework after each production run, enabling the recovery of up to 98% of leftover product

Agitators: food grade oil

All geared motors of INOXPA agitators use H1 (incidental food contact) food grade oil registered by NSF

Pilot plant session: mixing of solids

On June 11-12, INOXPA hosted a training session on mixing of solids.

Maintenance videos: SLR rotary lobe pump

INOXPA presents the new series of maintenance videos on the SLR rotary lobe pump

Erich Gonçalves, INOXPA project leader in Brazil

On the 15th of May, Erich Gonçalves joined our company as local project leader for Brazil

3-A certified INNOVA seat valves

3-A certificate has been awarded to INNOVA N and INNOVA K seat valves, designed for use in the main processes in the food, dairy, beverage, and pharmaceutical industries

INOXPA, a consolidated brand in constant evolution

INOXPA’s marketing and communication department works toward the objective of maintaining a coherent image representative of a company in continuous growth

INOXPA announces the acquisition of FLUINOX

INOXPA announces the acquisition of 100% of the Spanish company FLUINOX, headquartered in Valencia

Training for distributors - October 2018

On October 2-4, INOXPA headquarters hosted a training course for the distributors

Trade fairs in 2018

We participate in the most important trade fairs of the industry, where we present our innovations

INOXPA introduces the new BMA magnetic agitator range

INOXPA’s new BMA magnetic agitator range is an innovative and highly hygienic solution

The best are the genuine

INOXPA genuine spare parts are subject to strict quality control, that guarantees the correct performance of all INOXPA products

Pump specialist seminar

INOXPA headquarters hosted an advanced level training course for distributors

Service and maintenance videos

INOXPA is developing a new type of videos: service and maintenance

Virtual tour 360º

360º tour allows you to virtually visit the Pilot plant and other INOXPA head office facilities

Training for distributors

Training courses for distributors form part of INOXPA’s ongoing personalised customer care and assistance program

PROLAC HCP and SLR pumps obtained the 3-A sanitary certificate

PROLAC HCP and SLR pumps obtained the 3-A sanitary certificate

Pilot plant session: sauces

A demo session oriented to manufacturers of sauces was held at the pilot plant

New logistics centre in Russia

STARINOX has recently finished the construction of its logistic centre on the outskirts of Moscow

New INOXPA website goes live

The new INOXPA Group website has gone live with updated graphics and contents

Pilot plant session

A demo session oriented to manufacturers of gels, shampoos and detergents was held at the pilot plant

INNOVA, the new valve family

Discover the new family of pneumatically actuated single and double seat valves for hygienic applications

Pumps with new surface finish

INOXPA announces the launch of the pumps with the new matt finish

INOXPA enters the INTERPUMP GROUP

INOXPA is now part of the Interpump Group

IE3 motors

The third stage of Regulation (EC) nº 640/2009 with regard to ecodesign requirements comes into effect

INOXPA Solutions Srl Moldova

The objective is to have an engineering company capable of developing projects and solutions for the countries of

Damià López, new General Manager

The Board of Directors of INOXPA GROUP wishes to inform you that Mr. Damià López has been appointed General Manager

Sales meeting 2016

INOXPA Headquarters in Banyoles hosted the Sales Meeting 2016

INOXPA community

The idea is to keep on sharing with you our projects and activities via the social media channels

New INOXPA pilot plant is open for trials

The Pilot plant is open for production trials and our customers are invited to carry out all the necessary tests

Thank you

Thank you all for the support we have received